Heavy Duty
Left Hand Drills
- Sizes: 5/64″, 7/64″, 5/32″, 1/4″ & 19/64″
- 135° split point for extra gripping power
- Fully ground HSS Cobalt increases strength & drill life
For the removal of damaged screws, stud & bolts. Left hand drill bits remove fasteners or creates the pilot hole required for a screw extractor. If the LEFT HAND DRILL does not remove the fastener, the hole drilled becomes the preparation for a screw extractor. The opposite direction flute enables the broken fastener to be gripped and wound out of the hole. The opposite direction flute permits reverse drilling, which stops the fastener being driven tighter. Ensure drill is run in reverse
Screw Extractors
- Sizes: #1, #2, #3, #4 & #5
- Reverse tapered flute for extra gripping power
- Spiral tapered flute for deep embedment which increases grip as the resistance increases
- Square end for use with tap wrench or spanner
For the removal of damaged screws, stud & bolts. Left hand drill bits remove fasteners or creates the pilot hole required for a screw extractor. SCREW EXTRACTORS are engineered to remove the toughest damaged fasteners after the preparation of a pilot hole. The opposite direction flute enables the broken fastener to be gripped and wound out of the hole.